Smooth and Lift™ Reuseable Nipple Cover

To apply the Smooth and Lift™ first make sure your skin is clean and dry. If your skin tends to become oily quickly, clean your skin with rubbing alcohol on a cotton ball to cleanse away any remaining oil on your skin.

Keep oils, lotions, and makeup away from the lifts. With a little care, your Bring It Up® Smooth and Lift™ will stay securely in place all day or all night long. For best results, store your Bring It Up® Smooth and Lift™ on the plastic storage cups provided, at room temperature, away from heat, sunlight or moisture.There is a peel away backing that will first need to be removed. Start by placing the lower portion of the "Smooth and Lift™" onto the nipple. Notice the center of the lift does not have any adhesive touching the nipple.

Instructions For Use

Firmly press and smooth the bottom half of the "Smooth and Lift™" nipple cover onto the nipple, areola and against the breast skin just outside and all the way around the areola.
NOTE: BE SURE TO PRESS THE ADHESIVE FIRMLY IN PLACE JUST ABOVE THE
AREOLA AREA BEFORE LIFTING. THE LIFTING ACTION TAKES PLACE AT THE
TOPSIDE OF THE BREAST NOT THE UNDERNEATH.

Once the lower part of the "Smooth and Lift™” nipple cover is securely in place, now with your fingers at the top half of the lift, pull the lift upward to the desired position.

Firmly press and smooth the top half of the lift against your skin. Repeat the same procedure on the other side.

Fashion Stick Cups

Read and review the care instructions on your garment carefully.  FOR BEST RESULTS USE ON CLOTHING THAT CONTAINS A LINING OR SHELF BRA*.
 
Determine the shape and placement of the cups. Trim cups if necessary.

Gently peel off the protective plastic film off of the cups. Position the cups inside your clothing, firmly hand-press the cups into place and enjoy your fabulous new look!
* A "shelf bra" is a simple bra structure that is sewn into a garment and is usually comprised of an extra layer of fabric.

Cup Care: Hand wash with warm water and mild soap, do not wring or twist cups, air dry, no bleach. Once cups are completely dry, cover with enclosed plastic film and store in product box.

Brow

Before you begin carefully separate the lifts. If some of the lifts are attached to one another at the edges, simply snip them apart with your scissors.

Be sure to use a sharp pair of scissors and cut outside the lines. If the adhesive should stick to the blades, simply wipe them clean with alcohol.

Instructions For Use

To apply the lifts first make sure your skin is clean and dry. If your skin tends to become oily quickly, clean your skin with rubbing alcohol on a cotton ball to absorb any remaining oil on your skin. If you have extra oily skin dust lightly with Bring it up translucent powder and wait 5 minutes.

Put on the headband included in your kit to keep your hair out of the way while you
apply the lifts.

Apply the bottom half of the lift at the point that you've chosen just above your arch,
and firmly press and smooth the lift against your skin.

Now remove the crack and peel backing from the top half of the lift, and push the lift upward and into your chosen position, gathering any loose skin under the lift as you work your way up.

Then just smooth the lift firmly in place against your skin.

To remove the lifts simply use your fingernail to lift the bottom edge, and peel off in an
upward direction. That is all there is to it!

Neck

Before you begin carefully separate the lifts. If some of the lifts are attached to one another at the edges, simply snip them apart with your scissors.

Follow the line that corresponds to your right and left side neck lifts as shown.

Be sure to use a sharp pair of scissors and cut outside the lines. If the adhesive should stick to the blades, simply wipe them clean with alcohol.

Instructions For Use

Using your scissors, clip out the Bring it Up Neck and Chin lift. Make sure your skin is
clean and dry.

Notice that you are provided with lifts for your right and left sides. The neck lifts are very versatile, you can flip them over and use them on either side.

Crack and peel the backing away from the bottom half of the neck and chin lift and place the adhesive against your skin slightly below your earlobe gathering up several folds of skin.

Remove the top backing and pull upward following the C shape behind your ear, hiding those folds behind the earlobe. See how much smoother your neck and chin becomes?

Collagenic Plant Protein Patch

The anti-wrinkle benefits of one application last approximately 12 hours. Benefits are cumulative. For optimal results, we recommend 6 treatments, one every other day, for 12 days, which results in a 39% cell renewal. Recommended follow-up is 3 treatments monthly.

Instructions For Use

• Cleanse face with a mild cleanser, pat dry.
  
• If skin is excessively dry, apply a light moisturizer and pat dry again. Patches will not properly adhere to heavily moisturized skin.
  
• Remove patch from sealed packet by opening with scissors.
  
• Remove adhesive backing and apply to the outer part of the eye area as shown for 30 minutes. (Patches can alse be cut to shape for use on forehead and lip zone.)
  
• Remove patch. Apply moisturizer and/or makeup as desired.

Caution: During application, the face should not be exposed to heat sources such
as hair dryers, UV lamps or sunlight. Dispose of patch properly.
Keep out of reach of children.

Breast

Before you begin carefully separate the lifts. If some of the lifts are attached to one another at the edges, simply snip them apart with your scissors.

Simply find the line that corresponds to your cup size and cut along the line as shown. Notice that if you are a larger C or D cup, no cutting is needed. If you plan on wearing a very low cut top, cut for one cup size smaller than your actual cup size. If the lifts are showing over a low cut neckline, simply peel up and trim the exposed edge.

Instructions For Use

Simply cut the custom fit forms according to your cup size. Then crack and peel the lower half of the Breast lift. Notice that the Breast lift is applied just above the areola, so the crescent shape of the Lift is pointed DOWNWARD.

Smooth the adhesive side to the topside of your breast just outside the areola. Then remove the backing from the upper portion "lift" to the desired position and press,
that's it!

Repeat the same procedure on your other side. Notice that you only need to use ONE breast lift on each breast. Experiment with the size of lift that is most comfortable to you. If you'd like more support, simply leave the lifts larger.

Bring It Up® lifts are hypo-allergenic. However, if redness occurs, wait a day before resuming use. In the unlikely event that severe redness or irritation persists, discontinue use. Suntanned or sunburned skin may be more sensitive in the breast area. Wait until your sunburned skin is healed before applying lifts.

Remember Bring It Up® Lifts will stay on until you remove them.

To remove the breast lifts start by peeling slowly from the lower portion of the outer part of the breast lift and peel upward removing the inside lower part last. Keep oils, lotions and makeup away from the lifts. With a little care, your Bring It Up® Lifts will stay securely in place all day or all night long.

For best results, store your Bring It Up® Lifts at room temperature, away from heat, sunlight or moisture.

Whenever you need replacement lifts or have questions, just call our toll-free customer service line at 800-670-6201. Our professional beauty consultants will be happy to help you anytime, from 8am to 5pm Central Time, Monday through Friday. Or for easy reordering, just visit our website at www.bringitup.com.